Why Get Your Car Key Programmed?
Many people need to get their car keys programmed. If you have kids that press the button too often or you've lost your keys, then the remotes must be reprogrammed.
Some dealerships and auto locksmiths have special equipment for this. They can also copy your existing key if it's possible.
Transponder Keys
A transponder key is a different name for an electronic car key. It is sometimes referred to as chip keys or a smart key. Transponder keys contain a microchip that can store and transmit information, which can help protect your vehicle from being stolen. The microchip sends out a unique identification code each when the key is put in the ignition. When the ID code matches in the car's computer the immobilizer is disabled and your engine will start to run.
This is a much more advanced security option than non-transponder keys, which do not contain an embedded chip and are not compatible with all modern anti-theft devices in cars. Transponder chips were developed to decrease the number of car thefts, and they have proven successful - car thefts have dropped dramatically since their introduction.
When the key is inserted into the ignition the small antenna known as an inductive coil located on the car key's transponder will be powered up. The transponder then transmits the radio frequency signal along with an unique "password" to your vehicle's anti-theft system. If the password is correct, the vehicle will shut down its immobilizer and allow you to start the engine.
If the password isn't correct, the immobilizer will remain in effect and the engine will not start. This is a great method to protect your car from theft because even if the key can be duplicated, thieves will not have access to the correct code to trick your car into starting.
The only downside to a transponder key is that it's not compatible with mechanical non-transponder keys. The keys for cars operate by physically moving lock mechanisms on the doors or the ignition cylinder. For example the VATS system from GM (Vehicle Anti-Theft System), which requires the right amount of resistance to turn the cylinder.
The non-transponder keys is still able to be duplicated at the locksmith. However, the thief will have to manually move locks in order to start the car, and will require a transponder programming tool to do so. It is for this reason that you should always call a professional locksmith like Pop-A-Lock, when you require a new car key or transponder cut.
Electronic Key Fobs
A key fob emits an alert to activate the locking system of your car, allowing you to unlock your door and access your vehicle. Depending on the features of your vehicle you can also control the trunk alarm and trunk. Fobs have a microchip inside that transmits codes to the receiver, which then interprets them. The code corresponds to an exact frequency. If the reader detects this frequency, it will issue a command to the lock.
If you're using fobs for commercial purposes, it can be integrated into an existing security system. This can add additional levels of security. Fobs are able to be immediately blocked in the event of theft or loss and are an additional security feature in a business where keys could drop off a desk and be picked up by unauthorised individuals. Fobs are also cloned and created as unauthorized copies floating around that have your security codes, making your car vulnerable to unauthorized access.
Fobs can be used as a convenient way to unlock your door without needing an actual key. It isn't difficult for the average person to program a fob even although it requires some technical knowledge. Fobs can be programmed using a special tool or by following the instructions provided in the vehicle's user manual.
The key fob reprogramming procedure is the same for all models. You can find more detailed information on your model in your owner's manual or on the manufacturer's site. However, it is important to keep in mind that these steps might not work for all models. If you have issues it may be worth talking to your dealer or an locksmith.
Start by getting into your driver's seat, holding the key fob that you want to program in your hand. Make sure your door is closed and that there aren't any other keys in the ignition. Press and hold the lock button on your fob until you hear a chime or the sound of the locks revolving and then you've entered the program mode. Repeat these steps if needed to program other fobs.
Enhanced Security
Transponder keys add an additional security feature that isn't always available with traditional key fobs. Transponder keys are less likely to be taken by thieves since the chip can only match the code to the immobilizer on your vehicle. If it fails to do that it will cause the vehicle to refuse to start, making stealing your car more difficult.
Modern transponder keys don't contain a chip inside the lock, but inside a separate part of the key. When you insert the key into the ignition a radio signal is transmitted to the transponder. If the code is correct, it will match the correct one in the immobilizer of your vehicle and the car will be allowed to start. Modern keys must be programmed correctly to work.
While you may be able to modify car keys by yourself, this process is extremely risky and should only be performed by professionals. Untrained people often discover that their keys do not perform as expected or damages the immobilizer inside the car when they attempt this. A reputable locksmith or car dealer will have experience with these situations and be able to assist you in the most efficient manner.
In addition, many advanced anti-theft systems depend on the proper programming of your key to function effectively. This means that you have to change your keys as soon as they are lost or stolen in order to ensure that they won't be able to gain access to your vehicle.
The benefits of personalized key programming for owners of cars in Philadelphia include increased convenience and peace-of-mind. If you're looking to take advantage of the extra security this technology provides, reach out to Nonstop Locksmith 24/7 today and discover how they can ensure your car is safe from theft and unauthorized usage. Contact them today for more about car key programming.
Getting Started
As the name suggests, car key programming is a process of synchronizing a car key with a vehicle, so that the car can recognize it as authorised. When the key is inserted into the vehicle, it transmits an electronic serial number to the computer system onboard. This allows the car to be unlocked. It's a good method to stop auto theft as if a car key is not properly programmed it won't let the vehicle start.
There are several options to get your keys programmed. One option is to go to your local dealer or manufacturer. These options are costly and can take a long time. You can also visit an auto locksmith. They'll have all the tools and expertise needed to program any car key, regardless of whether it's a new smart key or the earliest remote key. They will be able to work fast, which is important in an urgent situation.
Some people may choose to reprogramme their own car keys, but this is not an ideal option. It's hard to determine which of the various methods will work, and it is easy to make mistakes, which could damage the computer system onboard. A lot of the tools used to reprogramme vehicles are expensive and sophisticated which makes them difficult for the average user to use.
Another thing to consider is that, depending on the vehicle, it's sometimes impossible to reprogram a lost or stolen key. This is because the original key is equipped with a unique microchip inside which is connected to specific information about the vehicle. Reprogramming an original key that has been stolen or lost does not alter the details associated with it. The vehicle will therefore not recognize it as a valid key.
If you are looking to purchase an automobile You should think about getting the transponder key programmed as soon as you can. This will ensure that your new vehicle is as secure as it can be, and it's a here lot cheaper than replacing a stolen key.